Black ZO6 or C6 Wheels

[third base]

Anybody see or have any pics of a first gen. camaro with Black ZO6 or C6 Wheels. Did a few google searches and came up empty. Thanks-Garrett

[DeepBlue68]

You can get these wheels in black by Motorsport Wheels on eBay really cheap. They're knockoffs, but I've seen them in person, and I personally thought that they were pretty nice for what they cost. The only problem is if you look at the backspace/offset (rear), they're not correct for (at least my) 68 Camaro; the backspace is too deep unless you've got it mini-tubbed, and even then, I'm not sure if the wheel would come out far enough to be flush with the fender. I don't know of any place that can build these with custom offsets, which is what I think you'd have to do.

[popindamos]

i got my 68 camaro mini tubbed with 18x12 zo6 rims on 335 18s no mod of the rim req i do have a spacer in the rear to get that look i wanted and found that 345s could get in there as well for the fronts i cut 18x10.5 down to get it to work i believe they are at 18x8.5 with 245 40 18s not positive but they work and for the price i think they look extremely well.

[ryans67deuce]

i got my 68 camaro mini tubbed with 18x12 zo6 rims on 335 18s no mod of the rim req i do have a spacer in the rear to get that look i wanted and found that 345s could get in there as well for the fronts i cut 18x10.5 down to get it to work i believe they are at 18x8.5 with 245 40 18s not positive but they work and for the price i think they look extremely well.

[SYDEWAYZ71]

[93Polo]

http://peachstateposse.com/ipw-web/gallery/album167

The 1st page has a pic of a black Z06 motorsport wheels. The 2nd page has a pic of a yellow Z06 with black wheels and a machined lip.

[DeepBlue68]

That first Vette with the black Z06 wheels looks really wierd. I think he needs bigger rotors because it looks really unusual being able to see so much of the suspension behind the brakes.

[68ls1wannabe]

i got my 68 camaro mini tubbed with 18x12 zo6 rims on 335 18s no mod of the rim req i do have a spacer in the rear to get that look i wanted and found that 345s could get in there as well for the fronts i cut 18x10.5 down to get it to work i believe they are at 18x8.5 with 245 40 18s not positive but they work and for the price i think they look extremely well.

I'm know considering doing this setup. Does anyone know if I'll have to use spacers on the front after getting the wheels cut down. I want to use 17in wheels. should that matter?

[lt1chevelle]

do u think they might fit on a 65 chevelle? i dunno how much diff the rearends in a 65 are then in a 68 camaro