Results 1 to 10 of 10
-
02-03-2006 #1
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
How many of these LED lights can be wired together?
I have quite a few tricks up my sleeve and I was wondering how many of these style LED lights can be wired together in a circuit. What I mean is if I wire a lot of them to 1 positive wire and a lot to 1 negative wire will I have problems??
I just hooked up 2 very similar to these for my license plate lights.
I got this pic from DSE.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
02-03-2006 #2
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Never mind I just called around to several dealers that sell these and found my answer. I will be buying some of these from DSE in the near future for my next project.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
02-03-2006 #3
Registered User
- Join Date
- Jul 2005
- Location
- Santa Barbara CA, & Los Angeles CA
- Posts
- 15
Hopefully these links can help, since all LED’s are different just take the info off the LED package and plug it into the corresponding spot.
LED series/parallel array wizard.
http://led.linear1.org/led.wiz
If you are not using 12 volt LED’s like myself, then you can figure out the proper resistor to use, so that the LED doesn’t burn up.
LED series resistance calculator.
http://led.linear1.org/1led.wiz
Good luck, John
02-03-2006 #4
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
I just ordered some of these LED lights for my next project.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
02-15-2006 #5
Registered User
- Join Date
- Aug 2004
- Location
- Red Deer, Alberta, Canada
- Posts
- 1,364
LED turn signals or tails..... haha. I plan on doing the same
-MattMatt
72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
Instagram: Cst_koon
02-17-2006 #6
Registered User
- Join Date
- Aug 2004
- Location
- El Dorado Hills, CA
- Posts
- 789
I am in the process of making LED tails, corners and turn signals for my ride. Does anybody have a circuit board they know fits?
Brad
68 Camaro - Procharged LQ4 coming - Currie 9" narrowed, bagged, lays frame, BMW projector HID's LED tails, 18"s, lexus center console, seat warmers, A/C... Mini-tubbing in progress!!
07 BMW 750li -loaded
02-19-2006 #7
Registered User
- Join Date
- Jan 2006
- Location
- Abbotsford, BC Canada
- Posts
- 169
You can make your own, just get what's called a "bread board" from any electronics shop (even Rad Shack) and mount your LED's to it and get jumper "traces" that come in all different lengths to make the "traces" on the board, all the parts are very cheap.
Originally Posted by whytry
03-23-2006 #8
Registered User
- Join Date
- Aug 2004
- Location
- Melbourne, FL
- Posts
- 1,046
If looking to replace your socket style bulbs with LEDs check out this site ...
http://www.superbrightleds.com/67 Firebird Convert 455 +.060 Johnny Winters TH400 74cc KRE d-port flowed @ 310 cfm heads piston dished 16cc H-beam rods Comp Cam 305-AH-8 cam 108* LSA 253/260 @.050 duration .577/.594 lift w/1.65 rockers Ford 9" 3.55 Detroit Locker M/T Sportsman Radials 31x18x15 on Convo Pro 15x15s
Honest dad that 455 on the side of the block is a serial number
03-23-2006 #9
Registered User
- Join Date
- Jan 2006
- Location
- Abbotsford, BC Canada
- Posts
- 169
We have been playing with the new 1 watt LED's, those have some crazy output for such a small thing.
Tim Baillie
Owner / Publisher
The Hot Rodder Journal
Your Hot Rod Lifestyle Magazine
www.hotrodderjournal.com
04-24-2006 #10
Registered User
- Join Date
- Oct 2004
- Location
- Nova Scotia - Canada
- Posts
- 6
There is a diffuser film that is used on the inside of lenses does any one know were that can be found?
Cheers
Reply With Quote
