Results 1 to 4 of 4
Hybrid View
-
04-07-2006 #1
Full Blown G-Machiner
- Join Date
- Dec 2005
- Location
- Coolidge, GA
- Posts
- 988
Help ASAP!! Reveal molding stud locations!!
Need help ASAP. We were fixing to set in the front and rear glass when I noticed I had not yet installed the reveal molding studs along the roof edge. Anyone got any idea on the measurements on how these things should be spaced and how many. Got to do roof edge on front and rear
-
04-07-2006 #2
Registered User
- Join Date
- Nov 2000
- Location
- O-town
- Posts
- 4,330
If you want I go count my 68 in the garage, let me know !!
Steve68- 1968 Camaro SS LSX T56, 12bolt 3:90's, 18" Fikse Profil 13s, Deep Fathom Green paint, Spearcos, just bunch of old junk because another member said so, LOL
70 Nova SS street/drag 454, T400, 3:55, ugly!
04-07-2006 #3
Registered User
- Join Date
- Aug 2004
- Location
- CHICAGO SUBURBS
- Posts
- 761
If there are any stock studs left put a clip on and check their depth. They should be about a 16th or less below the painted surface. If all the studs are gone you can hold the clips on by hand to the right depth and drill them. FRANK
04-07-2006 #4
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
I would go about every 8 to 10 inches, being sure to get a clip within a few inches of anyy moulding end. I am shooting off the hip here, if memory serves, there are about 26 on the rear window and 19 up front. I drill them and use pop rivets, and put a dab of sealer over the rivet head
Reply With Quote
