Results 1 to 15 of 15
Thread: Axle Bearing Leak
Hybrid View
-
12-10-2007 #1
Registered User
- Join Date
- Apr 2007
- Location
- Colorado
- Posts
- 119
Guys, I just recently installed a Moser 9" in my car with the large 3.150" Ford bearings. I installed the seals which were not installed by Moser and once I installed these i cleaned the housing real good and put a smear coat of RTV around the area where the seal makes contact with the housing. I have had ZERO issues with leaking. If my dad wouldn't have told me to do this, then it probably would have been a different story! Hope this info helps fellas
http://www.fquick.com/garages/viewga...ewimg&id=69074
-
12-10-2007 #2
New to Pro-Touring
- Join Date
- Mar 2007
- Posts
- 3
I have those size bearings also. I will give it a try. Thanks for your help!
12-27-2007 #3
New to Pro-Touring
- Join Date
- Mar 2007
- Posts
- 3
Just an update... I have installed axle seals in my 12 bolt Moser, with part#7900 housing ends and the 3.150" Ford bearing. It appears no leaks so far. BTW, I ended up calling Moser and they recommended National Seal #473229. Hope this helps out anyone.
Reply With Quote
