Results 1 to 5 of 5
-
03-24-2006 #1
Registered User
- Join Date
- Jun 2005
- Location
- Greenwood, SC
- Posts
- 2,314
Engine/hood clearance issue help?
Guys, I need your help on thinking up ways to lower my engine height just a little bit...like a half an inch at the most. I just need a little bit more clearance between the hood an the air cleaner.
All I've thought of so far is trimming the base off of my air cleaner. Any other ideas?
-
03-24-2006 #2
Registered User
- Join Date
- Mar 2005
- Location
- Severn, MD
- Posts
- 405
I trimmed the base of my air cleaner, pretty simple way of lossing 1/2 inch. Also try a shorter air cleaner element
-
03-24-2006 #3
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
If you only need to gain 1/2" I would just modify the air cleaner. There are soo many sizes to choose from. Even if you got a shorter filter that could solve the problem. Any pics?
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
03-24-2006 #4
Registered User
- Join Date
- Jun 2005
- Location
- Greenwood, SC
- Posts
- 2,314
all I've got is generic engine pics....I tried to snap some that showed the clearance problem, but that's a wee tad difficult...since the hood has to be....closed
I have had zero luck finding a shorter element. I'm using an STP element for some random toyota something right now....
Since this shot, I've trimmed off as much of the air cleaner bolt as I can get away with.
-
03-24-2006 #5
Registered User
- Join Date
- Aug 2004
- Location
- Ridgecrest, CA
- Posts
- 232
K+N makes dropbases for aircleaners. I'm using their 14"x3" with an 1.25" drop.
1968 Plymouth Road Runner
-
Reply With Quote
