Unisteer rack problems!

[ilovefirstgens]

Well after waiting over a month after ordering the rack i finally got it yesterday. so today i went to install it after a while worked in the lca bolts and went to mount the rack and ran into the following problems.



1. the holes in the rack to mount to the sub are easily 1/2" too wide, ive spent the last 3 hours loosining one side then the other, just trying to squeeze it on, to no avail. Sny suggestions on that, im hesitant to drill out the holes as it is afterall the steering!

2. one of the banjo fittings on the rack goes just where a pan bolt on the ls1 does, so i ground the crap out of one of the stock bolts, it still didnt fit, so looks like ill be cutting a good part of the head off the banjo fitting as well.

Im about ready to take a hammer to this thing after 7 hours of work, on the plus side the radiator fits pretty well....