Results 1 to 20 of 56
Thread: Flat bottom (belly pan)
Hybrid View
-
03-20-2006 #1
Registered User
- Join Date
- May 2005
- Location
- Rolla, MO
- Posts
- 304
The pics don't show, but the mufflers are not enclosed. One, I was not sure that the pan would clear and second, I was worried about the heat. The pan is notched around the mufflers and they are fully exposed.
The pans don't seal to the factory floor. Air can circulate from the engine compartment, between the pans and the factory floor and out the back just in front of the axle.
-
03-20-2006 #2
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Another thing to consider.
You might also want to drill a few holes or mabey make a couple small vents so that water and debri can escape. Last thing you want is sand and dirt collecting up there. Not knocking your idea at all, just helping you consider every precaution.Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
Reply With Quote
