What B/S w Wayne Due c4 ?

[Madspeed]

Guys i have been searchin and crawling these threads for 4 nights and my frigging eyes hurt. Somone tell me the mesurments for front 18X9.5 or 10's for my 69 Camaro w a Wayne due Clip (C4).
Yes I will mesure myself but I want some spec.s that worked for shure.Im Dying to order my Fatties. 17 10 or 18 10's frnt and 18 13 rear.And Yup im a Noob here. 69 w W/D clip 496 alum headed jessel b/drive solid roller aluminum headed PIG (War pig that is) 6 years in the makin and little progress since Children =(

I thank u all in advance

Ken F

[Jagarang]

Wayne Due front chassis with C4 vette components
Front wheel = Budnik GTX 17X9.5 with 6in backspace
255/40ZR17 pilot sport

Chris Alstons Chassisworks FAB9 Ford 9" rear
(Measurements)
55in Mounting surface to mounting surface
50in Axle housing w/o axles/flanges

Sectioned rear frame rails, mini-tub, offset shackles, narrowed tank, and out wheel lip trimmed
Rear wheels 18X12 with 6in backspace
335/30ZR18 Tire(Michelin Pilot Sport)

I spoke with Wayne personaly regarding this when ordering these wheels.

[Jagarang]

Asome thanks man. let me Bug you a little more. will 18 10 w same BS fit? And what do you think I should do 18 9.5 or 10 front and 18 13 rear or 17 9.5 or 10 front w same rear ? can you Pm me Pics or email pics of your ride?

Please don't let me be the only poor bas***d that knows the Carmen SanDiego show! If that is the case the mentaly change the caption to the "Scooby Doo" theme!!

I'm going to paste this in your thread as well.

I can't say for sure, but usually an increase in diameter, say 17" up to 18", gives more clearance to the control arms and starts to interfere with the fender and inner wheel well.

I don't think your 18" will hurt anything. The increase in height is less likely to cause you trouble than the extra .5 you want to increase in width. If it we me, I would probably meet in the middle by going up to eighteen but staying at 9.5in wide.

The rears are going to be tight I think. My 18x12 with 335s is very snug, with wheel lip trimming, frame notching, mini-tub, custom rear end, narrowed tank, offset shackles, and relocated upper shock mounts.I think the 13" rear wheel is far to close to not fitting for my taste, unless you are moving everything in more as far as frame rails, tank, springs, and shocks etc.

Pics of the work done on my car can be seen here...you'll have to search a bit, but they are there. Look through rows 15-21
http://photos.yahoo.com/jagarang

What are the other board members thoughts on this?

I know Wayne, and one of his employees, visit the board on occasion and surely would be able to give you a definite answer more than me. Lets hope they see this post.

[Madspeed]

Bump Comon Guys Help me out here FFS ive searched for 3 weeks now Im going Nucking Futts. I have an order placed W www.Bozeforged allready for Speedsters 18X12 w 4.5 Bs Rear and 18X10 fronts w 6.5 Bs Center caps engraved w Bowties. But ive mesured and i think they shoul,d fit but Id really like some input as once they are done I OWN them and it will cost me 150 a wheel to rehoop them. I beg U please help a brutha out. Called Wayne Due emailed him and he wont return my calls or my email. I understand hes a Buisy Dude.

Ken