Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Hybrid View

    1. #1
      Join Date
      Jun 2005
      Location
      Greenwood, SC
      Posts
      2,314

      reworking heads for unleaded fuel?

      so a buddy of mine pulled his heads off of his 69 because they're rebuilding the motor and when he sent them off to get cleaned up the shop told them they turned out to be high compression double humps.

      That's the good news. The bad news is that, according to them, theyre set up for leaded fuel, and want to charge an arm and a leg to redo them for unleaded fuel.

      Is there any truth to this? what are the differences between leaded heads and unleaded heads?



    2. #2
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793
      The only difference is that head designed for unleaded fuel has hardened valve seats.
      Likewise if the heads have EVER been rebuilt they most likley have had hardened seats installed.
      That said - I generally find that it isn't worth the $$ to rebuild stock heads anymore. After all is said and done, it generally costs about the same as buyin aftermarket heads that WILL out perform the stockers anyways
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett

    3. #3
      Join Date
      Apr 2001
      Location
      Miami, Florida
      Posts
      1,639
      Do what I did.
      I sold my '71 1971 455HO heads on EBAY for 1300(Freshly rebuilt) and used the $$ towards a set of alum. Edel. RPM's. I think the Edelb's were 1800, so I looked at it like a 70% discount on a set of better performing and lighter heads.
      Last edited by Jagarang; 01-27-2006 at 05:44 AM.
      Kevin.
      69 Firebird "Eternity"

    4. #4
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      just have them rebuilt. he does not need to have hardened seats instaled unless he plans to beat on the car often or if the compression is going to be that high like 10.75 or higher he will need race gas. a lot of race gas can be bought with lead still in it.

      and since im sure a lot of people will say im nuts. my 69 olds heads do not have hardened seats and i run 87 in there with zero problems. i even had the heads off recently and everything was perfectly fine. the lead cools the metal around the valves which gets very very hot. if your not beating on the engine, your not generating that much heat. just like when your crusing at 65mph your not making 300 hp or whatever.

      now if he wants performance out of these heads, then i would also suggest selling them if they arent numbers matching or just putting them aside and using the rebuild money to purchase new aluminum heads or even cast iron heads.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    5. #5
      Join Date
      Mar 2005
      Location
      NY
      Posts
      1,097
      Ummmmm........ what about lead additive????
      The needs of the many outweigh the needs of the few.

    6. #6
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      for me that would have meant a lot of money. i daily drove my TA and was filling up every other day. i was going through 6 gallons a day and getting 17 miles to the gallon. yes i was going that far. man i miss cheap gas.

      thats not a bad idea though if your not driving the car all the time like i was. i forgot about the additive
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    7. #7
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793
      I should say that I am not a "chemical guy", but in speaking with Larry Gray (works for Amsoil) he indicated that lead subs don't work. He indidcated that the best way to do a lead substitution would be to buy 5 gallons of race fuel every once in awhile.
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett




    Advertise on Pro-Touring.com