1957 Buick Behemoth Build

[dhutton]

Next up was body work. The only rust I had to weld in patches for was in the bottom corners of one door. I usually use polyester primer but decided to go with an all epoxy primer method and applied four good coats of black SPI epoxy. I did have a little Rust Defender left over from a previous build so I used it on the roof. A lot of hours blocking out the behemoth, especially the roof. . The firewall on these cars is a complete dogs breakfast so I smoothed it a little. There is also a huge battery tray mounted to the left inner fender which I deleted and smoothed. Battery will be in the trunk.