Results 1 to 20 of 27
Thread: Sub-Frame Connectors Appearance?
Hybrid View
-
05-02-2005 #1
Registered User
- Join Date
- Mar 2005
- Posts
- 467
I have a 69 convert Camaro and used the Comp Eng. subframes. We cut a notch for the SF in the converts cross brace that runs from the tranny tunnel to the outer frame, then tucked the SF up against the floor pan and welded the braces to the frames and front and backs. Very clean appearance almost "factory" and very rigid.
-
Reply With Quote
