19" Spal 850 Watt PWM Fan Universal; Huge CFM

[ryeguy2006a]

Hey there,

I picked up a pair of these fans a while back from a guy on eBay who was selling these 19" Spal fans with 850 watt motors that were overstock from an EV company from what I understand. They are high end fans that can flow huge CFMs. Based on the provided spec sheet that the guy gave me, they can support between 3500-3800. The dimensions are 20" x 20" so they should fit most any car on this site. I stuck with a stock 55 Belair radiator so this didn't fit my core size. If you are familiar with the 19" factory Gen6 Camaro fans, these are the same blades and motor, just in a universal housing. It is controlled with pwm, so you'll need a controller that can support it. I have run many different PWM fans with Holley with great success. With that large of a motor, you'll also need some very heavy gauge wiring to support the amp draw. Here are the pictures, and the spec sheet that I was given. Asking $300 each plus shipping. I will make a deal if you want both.









Spec Sheet



Thanks,
Ryan

[ryeguy2006a]

I looked at the diagram too quickly, and I thought it was in CFM, but was in m3/h. The conversion is about 3500-3800 cfm depending on how fast you spin. I also included a better picture of the dimensions. I revised the dimensions because they are just under 20x20, not 21x21 also. I've lowered the price to reflect the updated numbers and dimensions. Sorry for any confusion.





Thanks,
Ryan

[ryeguy2006a]

Sold!