Results 1 to 2 of 2
Thread: e-z clip question
-
01-23-2024 #1
Registered User
- Join Date
- Jul 2013
- Location
- N. Scottsdale
- Posts
- 420
e-z clip question
Decided to use Vintage Air E-Z Clip fittings and hoses on my latest project to simplify installation, but I ran into something I thought I should check on. After making the lines I noticed that the fittings can be twisted on the hose with a little pressure even after the clamps are locked in place over the cage. Same on both lines I made (#6 and #10)...Is this normal or did I miss something?
-
01-23-2024 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,826
That is normal. The oring seals on the fittings are unaffected by that rotation.
1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
Reply With Quote
