'69 Firebird - Counterfeit Trans Am

[Josh@Ridetech]

What frame connectors are you planning to run? I did the DSE connectors that recess into the floor pans and tie into the frame. I was very pleased with the fit and it really stiffened up the car. And if for some reason you are on the fence on engine mounts, just go ahead and do yourself a favor and get the Holley mounts and the 302-3 pan. It was so nice just bolting it in and it all just fit.

I've got our new bolt-in subframe connectors going in. I had them on my '79 Firebird and they were a tremendous change in the car. They don't hang super low and I don't have to cut into the floor so I'm happy!



I do have the 302-2 pan already. As far as engine mounts go, I ended up grabbing some of the ICT plates (to have some adjustment) and the Energy poly mounts. We've used this combo on several cars running our Tru-Turn and LS combon. It seems to work out well! I'll definitely be on here digging for info though, the 1st gen platform is one that I've never personally had so I may run into a few questions. Luckily, we've done a few of them here too so that helps! :D