Beginner With DC TIG

[ryeguy2006a]

Hey guys,

I'm starting to work with the DC Tig weld settings on my Everlast 225 MTS, and hoping to get some feedback. I've watched a ton of youtube videos on both AC and DC Tig welding tips, and think I know what I'm doing wrong, but would love to get feedback from any welders here.

Here's the first few attempts with a coupon I picked up online somewhere. I cleaned everything with a wire brush and finished with Denatured Alcohol before I started.



Here's an outside corner joint that I did for a fuel tank recess panel.





This was after I changed my positioning and slowed down a bit.



Any and all feedback is appreciated. You won't hurt my feelings. I'm happy to share my weld settings and setup as well if it's needed.

Thanks,
Ryan