Drop spindle suggestions please

[lbsurfer11]

Hi I'm running Hotchkis upper and lower control arms. Anyone know what a good dropped spindle is? Wanted to run ridetech truturn but wasn't able to get a straight answer on if this works with these control arms. Any help appreciated. Thanks

[streetk14]

I’m not all that familiar with the Hotchkiss arms, but I’d think you’d be fine using the ridetech tall spindles as long as the control arms use a standard height ball joint.

I’m using the ridetech lower arm and TruTurn package with a Global West upper arm. Most of these upper arms have extra caster built into them, but I think that’s about it. You probably won’t get a straight answer from the manufacturer on this, as they likely haven’t tested these different combinations and they’d prefer you to buy their control arm setup.

My thoughts anyway.

[Jk918]

ridetech has a new corvette hub spindle you can also run the tru turn on. I've seen quite a few different arms with the tru turn package pretty confident you'd likely be able to. Could reach out to Suspension Geek, I'd bet he'd have a answer for you.