Results 1 to 3 of 3
-
04-02-2026 #1
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 613
Where would I source a custom "A" arm?
I would like a custom length lower front control arm for a fox mustang. I would like it to have the typical urethane bushings at the chassis side, stock 94+ ball joint & the sway bar mount. I can provide an example arm for dimensions, but I would want the final to be .75" shorter than the one I provide. I know I need "a fab shop" but I don't believe we have anything local that would jig this up and get all the dimensions within a tolerable spec. Does anyone here do this type of work? Just to be clear, due to some health stuff, it will be 4 months or so before I am ready to do anything, but I would like to know my options.
-
04-02-2026 #2
Registered User
- Join Date
- Sep 2010
- Location
- Beach Park IL
- Posts
- 3,036
Try ModSquad Garage?
Donny
Support your local hot rod shop!
06-03-2026 #3
Registered User
- Join Date
- Sep 2007
- Posts
- 457
Make some phone calls into the west-coast desert off-roader world. Building custom control arms is routine for those guys.
BTW, is there a way to modify stock control arms into what you want? Chop them in half & shorten them or something?
People will look at a modified arm and say "Umm, I wouldn't trust a welded-up part like that." But they will trust an arm that that's welded together in 3-4 important places if it came from a catalog.
Reply With Quote
