Results 1 to 20 of 262
Thread: 66 Mustang Restomod Project
Hybrid View
-
09-07-2023 #1
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
I got the fuel cell mounted today. I mounted it flush with the trunk floor to give me useable trunk space. I have to make some modifications to the rear valence for the fuel lines but it will be below the license plate so it won’t show much.
-
09-09-2023 #2
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
I am running out of things I can do without an engine. I haven’t finished the front of the trans tunnel because I’m not sure if I will have to make mods to clear the Coyote. Without that piece, I can’t final paint underneath. A few small projects here and there to get ready. I made a little portal in the frame outrigger for the fuel lines. I can probably permanently mount the wheel tubs as well.
09-14-2023 #3
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
I painted the rear end and suspension components. My Second Skin spray-on arrived so I am finishing up the inside so I can get ready to spray that on thick.
09-14-2023 #4
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
Getting the trans tunnel fitted up. I had to make the jet exhaust nozzle looking thing to help lower the tunnel. My initial effort was too high.
09-15-2023 #5
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
I got my panhard bar welded and I put the resend back in to check the fit. Everything looks good.
Reply With Quote
