Jmantx's Square Body Build

[Jmantx]

No worries, boxing the frame should be fine. On the problem with the frame breaking at the steering box, it's a common enough problem that several companies offer a fix.





Actually it is, if you want more than 4 gears in an auto. You'd think a company like Holley at least would be supporting 10 speeds by now, or at the very least 8 speeds as they've been out for years now. The lack of trans support is the only reason I'm not going to run a Holley on my project. My knee won't take a clutch anymore, and I don't want a 4 speed after having had a couple of 8 speeds. If Holley would put out a GM 8 speed trans support, I'd be one of their first customers for it provided I don't already have one working.

I was trying to see if there was a way to use a cut down harness from a factory 6 or 8 speed, but I haven't found diagrams for those. I read about how great the 10 speed is, but then you have to use an Lt transmission with a gen3 based engine (more complicated imo).