A Tale of two TA's

[EVO]

last few items to finish up. Mounting the shaker to the intercooler of the Lt4. There wasn't a lot of room between the intercooler and the hood as I had to raise the drivetrain in the chassis to get more pan clearance for the 8l90. However, it did fit with a smaller size weatherstrip around the shaker perimeter. I made some small brackets to mount to the intercooler studs which bolted to the bottom of the shaker. Topped it off with a 3d printed honeycomb insert for the shaker. I also took my homemade intake tube to get Ceramic coated. Looks much better. Ive put about 500 trouble free miles so far. The car handles great and is very smooth.
Evan Q.