Problem aligning fenders

[customcarpainter]

With the Nova being a unibody type car it is basically sagging in the middle.Don't try to get the wheel wells to fit until the fenders are bolted in place.Your going to have to put the car back on its wheels so the suspension and body are where they would normally be.For some reason,putting a car on jackstands changes things.If you need the car sitting higher,put a rim under each tire,making sure the rims are all the same size.you will probably have to put a jack under the frame rail at the front and apply a little pressure to get the gap where it needs to be.Don't tighten any bolts until it fits like you want.Don't use spacers or shims unless you just have to.The fiberglass wheelwells could have the mounting holes drilled in the wrong place or could be some excess fiberglass at a mounting point.Its fiberglass so you may have to make it fit!