Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 7 of 7
    1. #1
      Join Date
      Feb 2013
      Posts
      677
      Country Flag: United States

      Having a rough time resurrecting 350/4 barrel combo

      Engine tuning is not my strong suit at all. I started with FI and prefer to stay there. That being said, I'm trying to get my 85 C10 motivated again after sitting for a few years. It's a little bit Frankenstein as it has a TH400 leftover from it's BBC swap and the old 350 from my Impala.

      Carb is an old 4 barrel from the Impala, no choke of any kind. Trouble I'm having is I can't get the engine started from cold at all without priming the carb with gas. It will start right up once it's warm.

      Also, I need to work up a throttle linkage with a kick down switch for the TH400 (was apparently never there).



      The truck is worth bringing back - no rust anywhere and the bed has no dents at all. Should I just ditch the carb I have and start fresh with something that has an electric choke?


    2. #2
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,156
      Country Flag: Canada
      My 2 cents yes ... just get a new carb with electric choke
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter @raustinss
      On Instagram austinss70

    3. #3
      Join Date
      Sep 2001
      Location
      Accord, NY
      Posts
      2,285
      Country Flag: United States
      Does the accelerator pump work?
      69 Camaro convertible, 410, M22, 8-pt cage therapy program. SOLD.
      68 camaro - SOLD
      67 Bel Air - New street project with perfect floors, frame and trunk!

    4. #4
      Join Date
      Feb 2013
      Posts
      677
      Country Flag: United States
      Quote Originally Posted by Rick Dorion View Post
      Does the accelerator pump work?
      Possibly not. It's clearly an old carburetor and hasn't been rebuilt since before I got it > 10 years, plus it sat idle for another 3.

      It also makes squeaky sounds when I rotate the throttle lever.

      I opted to go ahead and order a new Holley 4 barrel (with a choke) and just be done with that part of it. Hopefully that'll get me on to the next phase - street legal.

    5. #5
      Join Date
      Sep 2001
      Location
      Accord, NY
      Posts
      2,285
      Country Flag: United States
      I too want to go FI. Having said that, I put a 650DP on my 5.3 and am feeding my OCD with an AFR gauge and lot's of tuning!
      69 Camaro convertible, 410, M22, 8-pt cage therapy program. SOLD.
      68 camaro - SOLD
      67 Bel Air - New street project with perfect floors, frame and trunk!

    6. #6
      Join Date
      Sep 2009
      Location
      Atlanta Ga
      Posts
      113
      Country Flag: United States
      The 400 kick down switch would mount on the gas pedal under the dash. Your 1985 C 10 should have provision to mount it.

      Name:  kickdownpedal1.jpg
Views: 49
Size:  71.0 KB

    7. #7
      Join Date
      Feb 2013
      Posts
      677
      Country Flag: United States
      That's new to me and different from what I've been seeing. I was planning to use a switch up with the carb linkage.

      Found it online with minimal searching. Amazing how knowing what something's called makes it easy to locate.

      Quote Originally Posted by Timmah View Post
      The 400 kick down switch would mount on the gas pedal under the dash. Your 1985 C 10 should have provision to mount it.

      Name:  kickdownpedal1.jpg
Views: 49
Size:  71.0 KB