Results 1 to 20 of 245
Thread: 1970 Elcamino build!
Hybrid View
-
01-26-2021 #1
Rat Pack Member
- Join Date
- Aug 2002
- Location
- Waleska Ga.
- Posts
- 2,722
I had installed this 4th gen Camaro wiper motor in a different direction and decided I didn’t like it so I changed it to this configuration.
David Sloan
If you’re suggesting sending men with weapons of war to take my weapons of war,then I’m fairly certain that’s what’s called an act of war… and the definition of tyranny.which coincidentally is the reason for the second amendment to begin with!
https://www.pro-touring.com/showthre...ght=fun+camaro
https://www.pro-touring.com/threads/...lcamino-build!
-
01-26-2021 #2
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
[QUOTE=David Sloan;1350050]I had installed this 4th gen Camaro wiper motor in a different direction and decided I didn’t like it so I changed it to this configuration./QUOTE]
Hahhahaah - that task is next up on my list. Can you share a pic of the modifications you made to the firewall to mount it?
01-26-2021 #3
Rat Pack Member
- Join Date
- Aug 2002
- Location
- Waleska Ga.
- Posts
- 2,722
[QUOTE=derekf;[URL="tel:1350078"]1350078[/URL]]
yes sir!
Originally Posted by David Sloan;[URL="tel:1350050"
i opened up the stock wiper motor hole in the firewall to accommodate the 4 th gen wiper motor , then I trimmed the Camaro mounting plate down to fit inside the cowl area, drilled some new holes for the screws to pass though the firewall.
I have got to go to the junkyard to get some of the wiring to make it run , that will be the o shiiiit it works moment or back to the drawing board! Lol
hope this helps!
i do know that the Camaro wiper motor has a mechanism for a park on it that others don’t have. And the chevelle need that part.David Sloan
https://www.pro-touring.com/showthre...ght=fun+camaro
https://www.pro-touring.com/threads/...lcamino-build!
01-26-2021 #4
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
It does, although answers breed more questions; if you happen to take the thing back off, I'd love to see closer pics of the mounting. Originally Posted by David Sloan
Originally Posted by David Sloan
And here maybe I can be helpful, because I do have the wiring and can point at things.
Your pic had me questioning things until I saw that you didn't have the wiring - namely that the 4th gen motor has too much throw (looks like you've adjusted for it but maybe the 70 takes a little more than the 69 does?) Looked like I needed about 1.75" from the shaft to the ball and yours looks closer to 2" with my completely uncalibrated eyeballs.
More importantly - here's how mine parks, looks like you're ~80 degrees offset from this?
Reply With Quote
