Results 1 to 10 of 10
Thread: Powermaster Starter
Hybrid View
-
05-18-2021 #1
Registered User
- Join Date
- Dec 2002
- Location
- New York
- Posts
- 409
Very good wright up - thanks / spoke with Powermaster - said to ship it to them if it situation occurs again. Will try to start it tonight / tomorrow.
-
05-18-2021 #2
Registered User
- Join Date
- Jan 2018
- Location
- Saint Louis, Missouri
- Posts
- 86
I wonder if something might be floating around inside the solenoid to create an unwanted electrical path.
Originally Posted by 68 SuperRam
I remember an old car amplifier I had that turned on for no reason and turned out to be a sliver or two of aluminum that was peeled off when the end caps were put on with self cutting threads. This sliver had fallen down onto the circuit board and made a connection between a trace on circuit board that had the main battery power input on it and made connection over to a spot on the circuit board that had the trace for the remote turn on circuit. The amp turned off after I turned it upside down. When taking it apart after this I then found some aluminum slivers and then blew it out with compressed air, reassembled it and it never messed up again after that.
You might have one of those one in a million issues.
Jim
Reply With Quote
