1972 Buick Turbo LS Pro Touring - Garage Made

[lwilliams]

lots of progress from the last post. Trans cross member, transmission, torque converter, transmission cooler lines, cooler fan and trans temp sensor, SFI flexplate are all installed. Connected the Term X harness to the trans and wired in the rest of the trans harness to power, ground and etc. Bled the power steering fluid, installed the CPP hydrastop routed all the lines and installed the cooler in front of the radiator. Got the exhaust cross over installed and fully welded under the torque converter (will likely go back and tuck this closer to the trans pan), cut the down pipe shorter a little bit so that it tucked the exhaust under the car (it is way better and far less visible now).