Working out center console shape

[Cheveezy]

Going back to some of the earlier posts on your thread, you can camouflage the height of the console with carpet. Here’s what my interior guy did in my chevelle

Not to hijack but where did you get that dash insert? That's exactly what I've been looking for. Nice interior!

[65 drop top]

Not to hijack but where did you get that dash insert? That's exactly what I've been looking for. Nice interior!

Thanks, actually I made it out of an original dash. I shaved everything off, and filled in the radio and cigarette lighter holes. I did reinforce the backside of it where I shaved off the peak that goes from side to side, otherwise there’s very little material left. I used either epoxy or fiberglass to do that, I can’t remember which. It’s held up good so far.

[Cheveezy]

Thanks, actually I made it out of an original dash. I shaved everything off, and filled in the radio and cigarette lighter holes. I did reinforce the backside of it where I shaved off the peak that goes from side to side, otherwise there’s very little material left. I used either epoxy or fiberglass to do that, I can’t remember which. It’s held up good so far.

Nice! Thanks for the idea