Label makers Heat shrink sizes?

[70Uglybird]

So working to get my Terminator setup installed with a Bussman box. Plus install vintage AC and probably some rewiring of the AAW I had installed as it looks to be a bit of mess. Wanting to do it right I am getting all the better stuff as directed by Andrew the Holley EFI guru and was thinking of going with labels so I'm not having to document everything to remember.



​https://www.alliedelec.com/product/e...x350/71090859/

Looking at LW-PX300 and LW-PX350. leaning towards the later because of auto cut and can do all sizes of heat shrink where the 300 is limited.

If I get 350 it comes with 1/2 but thats huge for my purposes. So trying to figure out what else I need going from 10 to 22. 1/8 seems like a no brainer but the next size up is a question mark. Seems like 1/4 maybe but does that shrink to 10 gauge?

Not sure if anyone has experience with this or totally open to other systems. Would just order them all but 35 bucks a cartridge it would a bit of investment if I'm not going to use. I was looking at Dynmo but they were getting tore up on reviews pretty bad,.

Bobby