Results 1 to 7 of 7
Thread: Check my pattern please
Threaded View
-
01-04-2020 #1
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
Check my pattern please
New gears, new carrier, old housing.
Used the pinion shim the old gears had (.026)
.195 shims driver, .180 pass. Backlash looks to be about .008 but I'm not positive I'm reading it right.
Drive side:
Coast side:
Coast side is a little hard to read but if I'm reading this correctly - and I don't know that I am - I need a slightly thinner pinion shim?
-
Reply With Quote
