1980 Camaro 8.5 rear axle rebuild.

[79 Camaro]

I'm rebuilding my 1980 8.5" and want to use 30 spline axles from Moser. I'm leaning towards the tru-trac. In the Summit catalog it lists a 30 spline tru-trac can fit a 8.5" but needs special bearings. Can anyone help me with the center section part number along with the special bearings part numbers?

[Jonathonar89]

This is what Summit Racing says...

https://www.summitracing.com/parts/dtl-913a481

Notes:Eaton differentials require special bearings.
-For 1999 and prior- bearing LM102949 and race LM102911 are required. (2.89 O.D. race)
-For applications 1999 and newer with race O.D. of 3.06 in. bearing LM603049 and race LM603012 are required.

[79 Camaro]

Thanks for the reply.