Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Hybrid View

    1. #1
      Join Date
      Jul 2011
      Location
      York Haven, PA
      Posts
      21
      Country Flag: United States
      Two other tips I have learned (I'm going through the install right now):

      1.) Label all the termination points while it is on a workbench. It can be tough to tell what goes where while underneath the dash.
      2.) Plan to install the harness under the dash twice. Once to see how it all lays out and to make sure you have enough length (or more likely, too much length) and then put it back on the workbench to wrap/tape it up. It amazed me how less scary it became once I had the harness wrapped.



      Also, makes sure you get the crimpers.





    Advertise on Pro-Touring.com