Blinker Issue

[Richard454]

A question-

The Digi-Tails -not familial with them-

Are they designed for constant voltage or on/off?

I know some sequentials need to see a constant source and they handle the flashing internally.

The front lights will not without a flasher-

So you might have to wire the front and rear separate- put a flasher in the front circuit- and wire the dash indicator to that circuit as well. And the rear- you'll just have a constant source.

Try disconnecting the fronts (pull the bulbs)- jump the flasher and see what the rears do- or you coud just put a 12v source on the rear lights and see what happenns- let us know.



On my car I have my side mirrors that require constant - the indicators are running off one side of a speedway motor sequential module- then have a separate module for the rear and the reverse lights.