Steering box

[minendrews68]

We use (and offer both) the TurnOne and Borgeson boxes on our cars. They're both extremely nice pieces that work very well.

Turnone - Offered in both a 12.7:1 or 10:1 ratio - https://www.ridetech.com/products/st...-steering-box/

Borgeson - Offered in a 12.7:1 ratio - https://www.ridetech.com/products/st...-steering-box/

Let me know if you have any questions on anything!

Nightmarez I apologize for getting into your thread but thought it would be easier to ask Josh a question here than start a new thread about steering boxes.

Josh, I have a stock power steering box on my '68 Camaro. I was having a problem with it sometimes locking up (still being able to get back home) and checked the screen filter on the powersteering pump. I also added a filter on the low pressure side. Since then I've had a problem with it being hard to steer (like there's a place it hangs, not the same place every time). I have checked and nothing hits the box or anything associated with it. I have one header tube that is pretty close but doesn't hit the box. When it's cold or motor just started I don't have a problem. After it heats up is when the problem begins. Any ideas?



Thanks Carl