Jason's 67 pro touring Camaro

[TANKMASTERJ]

Just looking around. Which subframe and components did you use?



Thanks!

Speedtech front sub
Speedtech rear torque arm
Couldn't be happier
Rowdy LS7 and tremec 6 speed 9" with 4.11s

[Gmc427]

car has come out great,i know you would have posted wheel and tire size but are you able to tell me what you are running?regards

[TANKMASTERJ]

car has come out great,i know you would have posted wheel and tire size but are you able to tell me what you are running?regards

Rears are 18X10.5 with 295-40-18 drag radials
Car was build for 315-40-18 nitto 555g2 but couldn't get them during covid. So I ordered it the 295s I drag radials and street tread both. When those wear out I'll go to the 315s.
Fronts are 18X9.5 with Nitto nt555g2 in 275-35-18

[TANKMASTERJ]

Added a radiator expansion tank from Radium engineering. Very nice billet piece setup to take steam line from head, return that back to either water pump or radiator and also can plum existing radiator overflow into it. Has sight glass. Works great. I run it half full. It expands to full in sight glass when hot, and back to half when cooled down.