Results 1 to 5 of 5
Thread: Edl 2201?
-
12-09-2005 #1
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Edl 2201?
Has anyone here used the Edelbrock rpm hydralic rollercam? (2201)
and did/does it work well?
I`am thinking about using it with Cranecams rollerlifters 11519 in a sbc stroker (383) everthing else is Edelbrocks performer rpm package.All under 6.27 litres is a starter.
-
12-09-2005 #2
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
I have been very disappointed in Edelbrock Cams in general... very lazy profiles.
IMHO Crower makes the most aggressive Hyd Rollers1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
-
12-10-2005 #3
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Yes that`s true, but i want to use the valvesprings i have now and those don`t work with camlifts over 0.600"
All under 6.27 litres is a starter.
-
12-10-2005 #4
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 36
Which rollercam do you recommend where the lift at valve doesn`t exceed 0.600" ?
All under 6.27 litres is a starter.
12-13-2005 #5
Starting The Transformation
- Join Date
- Nov 2005
- Posts
- 130
Whats the application 383?
bretBauer Racing Engines
Specializing in late model GM motors
1964 GTO (work in progress for 13 years)
600 HP 365 cube SBC
C5 Front Suspension
Satchel Link Rear
T56
Not gettin done anytime soon
2000 Camaro SS SCCA FS Car
Koni Adjustables
35mm Front Bar
DOT Race tires....
Reply With Quote
