axle leak

[btmatt]

All, i need some help with a problem on my 9" ford axle. I have a leak at the passenger side axle seal I cannot seem to stop. Setup is as follows:
1. Strange HF9 housing with big Torino Ends;
2. Strange axles;
3. Timken tapered bearing and seal;
4. Wilwood backing plates with integrated parking brake.

Here is what I have done so far:
1. replaced rear wheel that was bent;
2. removed rear axle,bearing, and seal to inspect for damage;
3. sealed the bearing shell to housing end with film of RTV;
4. re-assembled being careful that the seal lip was not folded, kinked, etc.

I pulled the wheel last night to take some pics for another member and it is leaking again. Thoughts are as follows:
1. I am over filling the housing. I fill to the level of the plug in the side of the differential.
2. Seal got damaged and missed it somehow during last inspection.

Anyhow, I wanted to get thoughts from others before i tear into it again. Thanks, Matt