Results 1 to 17 of 17
Threaded View
-
08-01-2018 #15
Registered User
- Join Date
- Nov 2012
- Location
- Sacramento, CA
- Posts
- 1,918
Thanks Dave. I missed that.
Originally Posted by David Pozzi
Steve,
300# rear spring rate is plenty. So it's not a spring issue. Believe it or not the shock valving can be too soft or too stiff ... and "allow" rear wheel hop under hard braking. But it's not the cause. Since your spring rates are fine. I suspect you have too much anti-dive in the 4-link. Do you have a way to measure where the instant center is, so we can figure out your anti-squat percentage?
-
Reply With Quote
