68 Chevelle QA1 Front Suspension

[Zombie666]

Finally at a stage where I get to start installing all the goodies.



1. In the first photo the upper Control arm has two grooves with one side deeper than the other side. Does the side with a deeper groove affect the alignment and which side should I have it on. On my AC Cobra I have adjustable uppers for alignment to set toe, castor and camber. The QA1's are fixed. In the instructions they made mention of reusing shims between the upper mounting bar and the mounting plate on the frame. I bought the frame separate from the car and it didn't have any Suspension. Any idea where I can find info on what type of shims I need?

2. And the second photo, everything looking ok? I have to compress the spring some to get the castle nuts to tighten enough to get the cotter pins in place an drew ultimately set ride height but I a ways away from that.

thanks for any help!!
Perry