Results 1 to 3 of 3
-
12-22-2017 #1
Registered User
- Join Date
- Aug 2004
- Location
- Los Angeles
- Posts
- 592
Lowering Spindles for a 94-95 Mustang question.
I found these but they are the only ones I can find
https://www.racecraft.com/index.php?...9ab9615c1ff34f
Are there any other options? They are pretty proud of their product for sure!
I want to drop the truck but keep the cross member off the ground and the geometry close without really upsetting things.
The rule is measure twice and cut once. My problem is I still measure with a mic and cut with an axe!
-
12-22-2017 #2
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 612
Those are the cheapest version i know of. They did have a heavier duty one but i don't think they offer it anymore. I have a set around here on the normal one and they are a decent piece for their intendec purpose
12-24-2017 #3
Registered User
- Join Date
- Aug 2004
- Location
- Los Angeles
- Posts
- 592
Thanks for the info. I will have to bolt the truck back together and see where everything sits with some weight on it. I want it low but have the crossmemeber up off the ground. There will be very little weight on the front suspension when its all finished.
Originally Posted by CSG
The rule is measure twice and cut once. My problem is I still measure with a mic and cut with an axe!
Reply With Quote
