CXRacing 1969 Camaro LS TT Kit

[twinturbo69]

I contacted CXRacing to see and they are using 16 gauge for the headers

That equates to a.065 wall which is the same as other reputable manufacturers such as Stainless Works. Over time turbo headers tend to crack so its also good to check that they are using a thick flange for the headers 3/8" or better and purging all welds to ensure full penetration of the weld. I also recommend fabricating a solid mount to support the weight of the turbo on the header to prevent cracking. For obvious reasons its important to use solid engine mounts.