69 Camaro LS3 CAI set-up

[DT69Cam]

Anyone know what options are out there for a Cold Air Intake set-up in a 69 Camaro with an LS3 ?? I see Roto-Fab has one, but man, 540.00 for the kit is pricey!!

[dhutton]

I use the Airaid UBI stuff. They have a first gen specific filter box. Not as good looking as the Rotofab.

http://www.jegs.com/webapp/wcs/store...rsistYmm=false

Don

[DT69Cam]

Thanks Don

[Bwheeler287]

spectre makes a kit for first gen camaros with an ls swap. you can choose driver or passenger inlet. its setup to make some cuts on the tube to make it custom fit for your application. I used one of their setups for the driver side, trimmed the tube as need, trimmed down the top of the deflector for a little cleaner look, cut the hole and welded the supplied ls3 maf sensor bung in and had it all powdercoated satin black. looks awesome.

[DT69Cam]

spectre makes a kit for first gen camaros with an ls swap. you can choose driver or passenger inlet. its setup to make some cuts on the tube to make it custom fit for your application. I used one of their setups for the driver side, trimmed the tube as need, trimmed down the top of the deflector for a little cleaner look, cut the hole and welded the supplied ls3 maf sensor bung in and had it all powdercoated satin black. looks awesome.

Thanks for the reply. I went with the Roto-Fab CAI. I'm gonna have to make a few mods for it to work with my Entropy radiator. The Roto-Fab CAI is sick though.