Ridetech Tru Turn/68 Camaro

[67rally]

5.25" bs on a 9" wheel will put the wheel mounting surface in the same location as 5.5" bs on a 9.5" wheel, and same as 5.75" on a 10" wheel. It should just give you more clearance (equally) on the inside and outside of the setup.



18x9 w/5.25" bs is a very common size for the rear of a 1st gen Camaro (usually running a 275/35/18 or 275/40/18). I'd ask around and see if anyone you know is running an 18x9 rear and borrow it for the front mockup. If it will fit with a 275, you know you're good to go with a 265.