Results 1 to 5 of 5
Thread: 4.0 Whipple fitment
-
09-08-2017 #1
Registered User
- Join Date
- Jun 2015
- Location
- San Diego
- Posts
- 165
4.0 Whipple fitment
Hi,
I have a 67 Camaro with a 2 inch cowl hood, DSE sub-frame, and LSX motor. Has anyone been successful in adding a 4.0 Whipple under the hood? I'm okay with modifying the inside of the hood but i don't want to replace it or have the blower sticking out. Any pics or advice is greatly appreciated.
Many thanks in advance!
Kris
-
09-27-2017 #2
Registered User
- Join Date
- Sep 2014
- Location
- Wisconsin
- Posts
- 21
Did you end up getting any pics/answers in your searching? Just trying to see if I'd end up in the same boat
09-27-2017 #3
Registered User
- Join Date
- Aug 2004
- Posts
- 153
It's a 68 with a Speedtech subframe but it will give you an idea.
http://www.superchevy.com/features/1...s-1968-camaro/
09-27-2017 #4
Registered User
- Join Date
- Jun 2015
- Location
- San Diego
- Posts
- 165
Thanks, I wonder if the it would have fit under a 2inch cowl hood or if the 4inch was needed?
Originally Posted by Dave95Z28
09-28-2017 #5
Registered User
- Join Date
- Sep 2014
- Location
- Wisconsin
- Posts
- 21
From that angle, it looks like the s/c sits at most, maybe 1" above the top of the firewall at the cowl area. So might fit. But the engine mounts being used and the front/back location of the motor would have an affect. That snout/pulley area could cause an issue at the hood line if the engine was located further forward than others??
Reply With Quote
