Results 1 to 20 of 351
Hybrid View
-
07-29-2017 #1
Registered User
- Join Date
- Oct 2011
- Posts
- 721
First update and problem. The car was mocked up with the radiator support in the wrong hole in the chasssiworks frame. I found this out when I had to install the inner wheel tubs and nothing was lining up. I looked at the Chassisworks instructions and sure enough it wa in the wrong hole. When I went to put the bolt into the correct hole it was cross threading. I tried taping the hole but the weldnut just came off inside the frame. An email to Chassisworks did nothing as I had no proof of purchase and senior tech never heard of has seen this so this is a problem I had to fix myself. I bought a $90 welder from harbor freight and would try my hand at welding. With a grinder I cut a hole in the from to access the nut, then I cut the bolt in half. Bought a new nut and bolt. Welded in the nut in the frame. Welded in the hole in the frame. Will post pics of the finished piece. It came out surprisingly well considering this was my first time doing something like this and welding! I'm sorry I didn't take any pics of the access hole I created I was too nervous so I had to just finsih what I started.
- - - Updated - - -
Yes pwm sorry typo
-
Reply With Quote
