1967 Camaro (pro touring)

[Vanhoosejm]

1967 Camaro for Sale.

To start off this car is not a show could but could be, I drive it weekly, I race it and autocross it. so it does have flaws.

Body-
Rust free all new metal when I restore it in 2014.
Mini tub with DSE tubs.
Paint is cyber grey metallic 7 out of 10
All trim powder coated Satin black
Smooth firewall



Suspension
TCI engineering sub frame with Single adjustable ridetech coilovers(550lbs springs)
TCI Engineering Subframe connectors
TCI Engineering Rear Torque arm setup with Single Adjustable ridetech Coilovers (300lbs Springs)
Shorten Currie 9 inch with Tru trac 31 spline center section (3:89 Gear)
Have a 2 400lbs spring and 2 250lbs springs as well (10inch)

Brakes
Wilwood master cylinder with stock disk to disk proportion valve
Wilwood Front and rear disk brake 12 inch Slotted and drilled with 4 piston caliper black
Extra front and rear rotors and 1 set of pads

Drivetrain
LS1(out of a 99 trans am) with Fast 92mm intake and throttle body and 36lbs. injectors.
Does have arp rod bolts.
Magnum T56 close ratio
Wilwood Slave cylinder
Custom cut driveline
Pypes violator 2.5inch Exhaust turn down before the rearend
Headers from TCI engineering


Interior
dakota digital dash
Stock reupholster rear seat
Kirkey 16 inch road race seats
Ridetech tiger cage with ridetech 5 point harnesses
Radio with hidden antenna I use XM radio or my phone

Wheels
Forgeline ZX3 wheels Satin black with polish lip 18x9 front and 18x11 rear
BFG rival S tire 275/35 front and 315/30 rear new about 200 road miles and 4 wet autocross passes

Lights
Turn signal, brakes lights, park lights, reverse lights all have LED Bulb, Headlights are LED for a new jeep.

Car weighs 3200lbs with 3/4 tank of gas.

The bad.
No horn
no interior dome light
No heat or AC
Never hooked up the door locks(it was always garage kept, they are there just never hooked up)


Car has 10,500 miles on it
Ill send pictures to serious buyers
located in Kannapolis NC
65k is the asking price.
606-367-7613 Matt