Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Thread: Wtb sbc

    Hybrid View

    1. #1
      Join Date
      Feb 2015
      Posts
      19
      Country Flag: United States

      Wtb sbc

      Hello everyone, I'm in the market for a good performance SBC that won't break the bank. I currently have a 327 in my 68 camaro. Been thinking about doing some aluminum heads for more power but if someone is looking to get rid of their sbc to go the LS route let me know what you got. Not trying to break the bank though, Thanks.



    2. #2
      Join Date
      Dec 2017
      Posts
      9
      What part of the country are you in? I've got a bunch of stuff you might be interested in.

    3. #3
      Join Date
      Feb 2015
      Posts
      19
      Country Flag: United States
      Quote Originally Posted by Afflicted1 View Post
      What part of the country are you in? I've got a bunch of stuff you might be interested in.
      I live in Wilmington, NC. Just south of Camp Lejeune. What do you have?

    4. #4
      Join Date
      Sep 2009
      Location
      Atlanta Ga
      Posts
      115
      Country Flag: United States
      Name:  IMG_2404.JPG
Views: 387
Size:  124.0 KBName:  IMG_2405.JPG
Views: 362
Size:  123.5 KB


      I have a 383 TPI motor and I live 65 miles north of Atlanta Ga. Below are some of the specs. Never been run after built. I went a different direction with a LS engine.


      TPI intake with reworked injectors by Howell which is also the vendor that made the wiring harness and computer with tune for this engine (OBI).

      Aluminum L-98 Corvette Heads 202 vales, guide plates with ARP Rocker studs. Roller rockers and new push rods, springs to match the below cam. some port and combustion chamber work.

      Com cam custom grind part number for grind 12-000-8 1.050 base circle for clearance. This was a customer grind too match the computer to engine profile. two piece timing cover with double roller timing chain and thrush bearing and button.

      block is a 4 bolt main truck block that started standard. ARP bolts, new oil pump and balancer. The crank is a eagle forge and internal blance. Eagle H beam floating rods with JE forge dish piston. oil pan and Auto fly wheel with ARP bolts.

      The water pump, accessory drive pulleys, Dist, Spark Plugs, wires and starter are new.

      The shorty headers are Street Performance ceramic coated to fit a 69-74 nova or first gen camaro.

      Sorry for the over load and I sure there are some things I left out.

      If you are interested PM me a Phone number and a good time to go over it.

      Thanks Tim.

    5. #5
      Join Date
      Dec 2017
      Posts
      9
      Trick flow generation 1 aluminum heads 2.02/1.60 63cc chambers, I think.
      There's less than 500 miles on these heads, and had a fresh 3 angle valve job before being installed on an engine that was never fired
      No rocker arms, pushrods, or headbolts

      383 long rod short block 4-bolt mains
      350 bored.30 over, align honed, decked, internally balanced and blueprinted
      arp studs on rods and main caps
      Milodon oil pan
      4340 forged crank
      4340 forged h-beam rods, balanced
      Trick flow forged pistons, balanced
      Rings set up for forced induction
      Crane/summit cam will get specs soon, I'm traveling

      Edelbrock Victor Jr. Intake port matched (new) not in box

      Vortech Carbureted Centrifugal Supercharger Kit with upgraded t-trim supercharger new, never used, satin finish

      Road demon carb for carburated blow through kit (new) used in mock up only

      Snow performance stage 2 methanol injection kit (new in box)

      We can figure out some prices if anything interests you. I won't be back home for a couple days to complete the list, as this was just off the top of my head.




    Advertise on Pro-Touring.com