Results 101 to 120 of 168
Thread: 1972 C10 Build
-
02-18-2021 #101
-
02-18-2021 #102
So after driving it for a few days, we noticed the turbine and compressor housings were seeping oil, enough to get into the charge tubes and the exhaust. So we are building a sump tank for the turbos to drain into, then from there it will go into the scavenge pump and up into the motor. We also think some of this has to do with there not being check valves on the feed lines. So I’m going to remedy both of those issues.
I also pulled some of the turbo kit off to clean out the oil and while that’s being done I dropped off the turbine housings to get ceramic coated hoping it will help with the temperatures seeing they are next to wiring/ brakes lines etc.
The turbos work awesome, Just need to perfect the oiling system for them is all. At least it’s something simple
-
02-18-2021 #103