6.0 and 6.2 Complete Engines and Transmissions

[Mike Norris]

Hey All,



I was looking for a drivetrain for my 70 C10 project and ended up with a bunch of units. 3 Trailblazer SS LS's (2 2WD and 1 AWD), 2 L92 6.2's w/ 6L80's and a G8 L76 with 6L80. I also can get a rolling chassis from a 2005 Corvette LS2 w/ T56 trans.

They are complete engines but not all have coils and good harnesses. The one complete I have is a 2008 LS2 AWD TBSS with ECM and TCM

Looking for $3800 plus freight for the 2 LS2 TBSS setups with no coils or ECM's, $4500 plus freight for the complete LS2 with ECM and harness.

Looking for $5000 for the 6.2's and 6.0 with the 6L80's

For the Corvette rolling chassis looking at $6500

I have pics of the rolling chassis and will get pics of the engines later this week. Most are in the 50k to 80k mile range and have been sitting for about a year in inside storage.

Hope this helps some folks out. Thanks.

Mike Norris

[Z06vet]

Are either of the 2wd TBSS setups 24x?

[Mike Norris]

All of the TBSS LS2's are 58x. 05 Vette and 05-06 GTO LS2's are 24x

[Z06vet]

We have a 24x TBSS motor in the car now. It was an 06

[Mike Norris]

These are 07 and 08's that used the E67 ECM and are 58x. Is yours a E40 ECM? If so that would make sense.

[Z06vet]

its a 411 from a 99-02 Fbody