NEED HELP! full length headers hit upper tubular arms

[evostilo]

I have a 68 camaro with LS1 and full length headers.

The problem is that i droped in some tubular control arms and know there is almost no room between the headers and the control arms. could i heat the headers (with the arms off) with a small propane torch and add a dent where needed, or no heat and just hammer the dent? or just leave them as is and the poly bushings can take the heat?



When i had the stock a-arms there was more then enough room to clear the headers.



<a href="http://s27.photobucket.com/albums/c1...t=IMAG0640.jpg" target="_blank"><img src="http://i27.photobucket.com/albums/c1...o/IMAG0640.jpg" border="0" alt="Photobucket"></a>