Keefer Design Universal Large Gas Cap (Polished)

[Windy City Chevelle]

Keefer Design Universal Large Gas Cap (Polished). Large
universal gas cap - 4.5" diameter with 2 1/8" hose neck. This was just mocked up and its not scratched just needing some cleaning but never been used as far as fuel or anything. I am asking for $260 which includes shipping, they are 2-3 backed up on this one and I have attached Keefer Design Link. You can also contact me at 312-810-1311



http://www.keeferdesign.com/Universa...-Cap_p_45.html

[1nastyZ06]

Dang. If this was black I would be all over it. GLWS

[Windy City Chevelle]

Dang. If this was black I would be all over it. GLWS

They don't sell them in black everyone's either paints them or cost them. If you are interested I could ship out asap let me know awesome piece just going a differed route

[g-machine]

Hey 1nastyZ06, you can have it anodized black....

I'd be owning this if it were the small diameter version.

[1nastyZ06]

They do sell it in black. I have been checking them out. I have a brand new ridetech brushed finish gas cap/filler sitting in the box that I was going to have anodized black. If I could sell that one I would prob pick this one up and have it anodized black.

[1nastyZ06]

So does the center portion push in with the gas nozzle when filling up? I would be concerned about scratching it each time I fill up with gas. Or does the center section slide/move out of the way for filling with gas?

Thanks
Wes

[thumper877]

U turn to the left and it pops out then u just unscrew it like a normal cap. Then when ur done pumping screw it back in and push in and turn to the right and it locks in

[thumper877]

Here's a pic of mine. I have the smaller version

[Windy City Chevelle]

Hey you know want this sweet looking fuel cap and at a great price might eve knock off a few bucks if we make it happen. Plus you don't see many rides with this style cap everyone followers the ridetech cap trend which is not but not as nice as this one @nasty

[Windy City Chevelle]

They do sell it in black. I have been checking them out. I have a brand new ridetech brushed finish gas cap/filler sitting in the box that I was going to have anodized black. If I could sell that one I would prob pick this one up and have it anodized black.

Hey you know want this sweet looking fuel cap and at a great price might eve knock off a few bucks if we make it happen. Plus you don't see many rides with this style cap everyone followers the ridetech cap trend which is not but not as nice as this one

[Windy City Chevelle]

Bump

[SD67]

I will buy 1nastyZ06's ridetech cap to free up cash for yours but I think his PM box is full. Let's make this happen!

[Windy City Chevelle]

How about you take it since this is something you don't see very often but let's make it happen il knock off a few bucks

[Windy City Chevelle]

I will buy 1nastyZ06's ridetech cap to free up cash for yours but I think his PM box is full. Let's make this happen!

How about you take it since this is something you don't see very often but let's make it happen il knock off a few bucks

[g-machine]

Here's a pic of mine. I have the smaller version

Did you do the brushed finish? Did you also add the six dimples (but they look raised)? Very cool - I'm going to have to order mine!

[Windy City Chevelle]

Here's a pic of mine. I have the smaller version

Did you do the brushed finish? Did you also add the six dimples (but they look raised)? Very cool - I'm going to have to order mine!

I got the polished finish and they don't come with dimples that I'm aware of. Why don't you get this one at a discount

[g-machine]

I got the polished finish and they don't come with dimples that I'm aware of. Why don't you get this one at a discount

I wish I could - I need the small diameter version.

[Windy City Chevelle]

Price drop $230 shipped

[thumper877]

Here's a pic of mine. I have the smaller version

Did you do the brushed finish? Did you also add the six dimples (but they look raised)? Very cool - I'm going to have to order mine!

Yeah mine came anadized so I stripped it and sanded it with 360 to get the brushed look then cleared it. I did the dimples by turning the bolts on the back until I got the look I wanted. Just be careful u dont have to turn the allen wrench very hard very soft metal. Just kinda adds a tough look I thought

[g-machine]

Here's a pic of mine. I have the smaller version

Did you do the brushed finish? Did you also add the six dimples (but they look raised)? Very cool - I'm going to have to order mine!

Yeah mine came anadized so I stripped it and sanded it with 360 to get the brushed look then cleared it. I did the dimples by turning the bolts on the back until I got the look I wanted. Just be careful u dont have to turn the allen wrench very hard very soft metal. Just kinda adds a tough look I thought

Was it clear anodized or sprayed on? All my billet is or will be brushed, select pieces are black anodized or ceramic coated.

Sorry to hijack your thread Rafiq!