Results 1 to 3 of 3
-
03-20-2016 #1
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
Recommendation - Driveshaft loop for 1st Gen Camaro
As the title says I am looking for a driveshaft loop recommendation. There are plenty to choose from, but so far I believe I may go with one these, unless someone has a better option.
Metco
http://www.jegs.com/i/Metco-Motorspo...ductId=1336611
Heidts
http://www.summitracing.com/parts/hd...t/model/camaro
-
03-21-2016 #2
Registered User
- Join Date
- Nov 2005
- Location
- St.Petersburg, FL
- Posts
- 194
Hi Rod!
Originally Posted by rocketrod
I used the Metco but because my engine was set so far back, I had to modify it quite a bit to make it fit. Also, because it had to be installed farther back than stock, it had interference with my exhaust. I made it work, but almost threw it away about 10 times trying to make it fit!
Hope this helps...
Matt'69 Camaro Coupe, Full Ridetech stage 3 suspension, moser wavetrac 12bolt, Forgelines, Ls3 T56 Magnum and once again tuned by Ed!
'69 Camaro Convertible, all DSE Stuff, LME 430 LS7, tuned by Ed Hutchings and built by http://www.gforcedesignconcepts.com/
03-21-2016 #3
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
Thanks Matt.....I appreciate the insight.
Reply With Quote
